Table of Contents
Advertisement
AVN-2675's Monitor Unit
Setup Menu screen
SCREEN
Select the Setup Menu screen
Press the [SCREEN] button for at least 1 second.
Setup Menu screen is displayed.
Select the System Setup screen
Select the [SYSTEM] button.
System Setup screen is displayed. (see page 66)
Select the Touch Panel Adjustment screen
Select the [TOUCH] button.
Touch Panel Adjust screen is displayed. (see pgae 68)
Exit the Setup Menu screen
Select the [RTN] button.
• If you cannot selected a setup menu item. Press the
[SCREEN] button for at least 2 second, the touch panel
position settings are reset to the factory defaults.
66
| English
SCREEN
System Setup screen-1
Setting the Navigation Mode <NAV>
Touch
Setting
[7RGB]
It becomes the RGB-image mode setting. Operate
the V.SEL button when the RGB-image from the
navigation unit connected to <NAV I/F> terminal
is shown on the monitor.
[7AV-IN1]
It becomes the composite--image mode setting.
Operate the V.SEL button when the composite-
image from the navigation unit connected to <AV
IN-1> terminal is shown on the monitor.
[7OFF]
It becomes the off mode setting. Use this setting
when there's nothing connected to the <NAV I/F>
or <AV IN-1> terminal.
Setting the AV IN-1 Mode <VD1>
Touch
Setting
[7AV-IN1]
It becomes the video mode setting. Operate the
V.SEL button when the image from the device
connected to <AV IN-1> terminal is shown on the
monitor.
[7OFF]
It becomes the OFF mode setting.Use this setting
when there's nothing connected to the <AV IN-1>
terminal.
• If you select "AV-IN 1", "NAV" setting is changed to
"RGB".
Advertisement
Table of Contents
