Changing routes
It is possible to change the routes that have been searched. Select
whole route display screen, and the route-change screen will appear.
<The screen for changing routes>
Adding destinations
Additional destinations can be set after setting destinations. In the following cases, additional
destinations will be set.
- When setting passing points between the set destination and the current point.
- When changing the set destination to a passing point and setting a new destination.
1
2
3
4
• Adding destinations (see page 29)
• Sorting destinations (see page 31)
• Clearing destinations (see page 32)
• Setting of passing roads (see page 33)
• Correcting of passing roads (see page 34)
• Canceling designation of passing roads (see page 35)
• Changing search conditions (see page 36)
Select
on the MENU screen or the Whole
Route screen.
The screen for changing routes will be displayed.
Select
of destinations and passing
destinations on the screen for changing routes.
Display the map including the points where
destinations will be set.
Refer to <Calling up maps> (see page 17).
Select
.
The destinations will appear at the position of
marks
.
on the MENU screen or the
using
English |
29