Dsi (Disabled System Indicator); Selectable Illumination; News Bulletin With Timeout Setting; Local Seek - Kenwood KDC-W4527 Instruction Manual

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"

Selectable Illumination

Selecting the button illumination color as green or red.
Display Setting
"COL RED" The illumination color is red
"COL GRN" The illumination color is green.

News Bulletin with Timeout Setting

It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
Setting
LED flashes.
LED OFF.
— 23 —
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for
<Traffic Information> (page 14).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.

Local Seek

Only stations whose reception is good are searched for in auto
seek tuning.
Display
"LO.S OFF"
"LO.S ON"
<In Tuner mode>
Setting
The local seek function is OFF.
The local seek function is ON.