Installation (Non-Japanese Cars); Installation (Japanese-Cars) - Kenwood KDC-PS907 Instruction Manual

Installation (non-Japanese cars)

■
Installation
Firewall or metal support
Accessory4
Phillips truss
Accessory2
head sheet
metal screw
(commercially
available)
NOTE
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
34

Installation (Japanese-cars)

■
Removing the hard rubber frame
1
Insert the removal tool9 deeply with the cut placed to the
right to remove the upper locks at an angle as shown below.
Bend the tabs of the
mounting sleeve with a
screwdriver or similar
2
Engage the catches on the removal tool3 and remove the two
utensil and attach it in
locks on the lower level, leaving the removal tool9 inserted on
place.
the upper level.
Lower the frame and pull it forward as shown in the figure.
NOTE
You will feel (not hear) a click when the tabs lock securely.
Lock
Cut
Accessory9
Removal tool
Accessory3
Removal tool
Catch
Lock