Tuner Features Tuning - Kenwood KDC-PS907 Instruction Manual

CD Mode
• Number buttons
Used to specify the track number used in direct track searches.
• TRACK buttons
–
Press the TRACK button to search through the tracks
backward.
+
Press the TRACK button to search through the tracks forward.
• 38 button
When a CD is playing, this button pauses the play.
Press the same button again to start play again.
Disc Changer Mode
• Number/ letter entry buttons
Used to specify the track (disc) number used in direct track
(disc) searches.
Use to enter letters during disc name preset.
• TRACK buttons
–
Press the TRACK button to search through the tracks
backward.
+
Press the TRACK button to search through the tracks forward.
Use to move the cursor while entering disc name.
• DISC buttons
–
Press the DISC button to search through the discs backward.
+
Press the DISC button to search through the discs forward.
Select numbers and symbols while entering disc name.
• 38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button
Enters and cancels the Disc Name Preset Play mode.
Tuner features
(See page 8)
Tuning
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "Auto1" indicator lights up
when auto seek tuning is selected, and the "Auto2" indicator
lights when preset station seek tuning is selected.
Selecting Tuning Mode:
Press the AUTO button.
Each time you press the AUTO button, the mode switches as
follows.
▼
AUTO 1 (Auto Seek Tuning)
▼
AUTO 2 (Preset Station Seek Tuning)
▼
MANUAL (Manual Tuning)
Tuning:
1
Press the TUN button to turn the radio on.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
3
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being
received.
15