Touch Sensor Tone; Manual Clock Adjustment; Dsi (Disabled System Indicator) - Kenwood KDC-8026 Instruction Manual

Hide thumbs Also See for KDC-8026:
Table of Contents

Advertisement

1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the [
] or [
second.
When "ENTER" is displayed, "CODE" is displayed.
4
Select the digits to enter
Press the [
] or [
5
Select the Security Code numbers
Press the [FM] or [AM] button.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the [
] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is
displayed.
8
Do the step 4 through 7 step operation, and
reenter the security code.
"APPROVED" is displayed.
The Security Code function activates.
• If you enter a Code different from your Security Code,
you have to start over from step 4.
Press the Reset button and when it's removed
from the battery power source
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and
reenter the security code.
"APPROVED" is displayed.
The unit can be used.
• If an incorrect code is input, "WAITING" is displayed,
and the input prohibited time shown below is
generated.
After the input prohibited time lapses, "CODE" is
displayed, and input can be done.
] button for at least 1
] button.
Number of times the
incorrect code was input
1
2
3
4

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"Beep ON"
Beep is heard.
"Beep OFF"
Beep canceled.

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [
] or [
second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
] or [
4
Exit Clock adjustment mode
Press the [MENU] button.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display
Setting
"DSI ON"
LED flashes.
"DSI OFF"
LED OFF.
Input prohibited time
5 minutes
1 hour
24 hours
] button for at least 1
] button.
25
|
English

Advertisement

Table of Contents
loading

Table of Contents