General Operation; Audio Control; Adjusting The Detail Of Audio Control - Kenwood DPX-MP3110 Instruction Manual

General Operation

Audio Control

You can adjust following Audio Control items ;
Adjustment Item Display
Rear volume "R-VOL"
Subwoofer level "SW L"
System Q "User"/"Rock"/
"Pops"/"Easy"/
"Top40"/"Jazz"/
"Natural"
Bass level* "BasLV"
Middle level* "MidLV"
Treble level* "TreLV"
Balance "BAL"
Fader "FAD"
Exit Audio Control mode (Volume control mode)
⁄
• "USER": The customized Bass, Middle, and Treble levels
are effective. This item can be selected at any time.
* You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page 7).
* Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the Control knob.
3
Select the Audio item to adjust
Press the Control knob.
4
Adjust the Audio item
Turn the Control knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the Control knob.
Range
0 — 35
–15 — +15
User setting/Rock/Pops/Easy/
Top 40/Jazz/Natural
(The indicator turns on
according to the setting.)
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15

Adjusting the detail of Audio Control

Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
Adjustment Item Display
Bass Center Frequency "BasF"
Bass Q Factor "BasQ"
Bass Extend "B EX"
Middle level
Adjustment Item Display
Middle Center Frequency "MidF"
Middle Q Factor "MidQ"
Treble level
Adjustment Item Display
Treble Center Frequency "TreF"
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for Control knob and [ATT]
button.
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 7).
2
Enter Detail adjustment mode of Audio
Control
Press the Control knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the Control knob.
4
Adjust the Detail Audio item
Turn the Control knob.
5
Exit the Detail Audio Control mode
Press the Control knob for at least 1 second.
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
Off/On
Range
0.5/1.0/1.5/2.0 kHz
1.0/2.0
Range
10.0/12.5/15.0/17.5 kHz
7
|
English