Appendix; Using.the.remote.control; Updating.software.and.map.data; Clearing.all.user.data - Kenwood DNX7200 Instruction Manual

a
PPendix
a
ppendix
Using the Remote Control
You can use a standard Kenwood system remote control
with the navigation system.
Updating Software and Map Data
To update the unit software, you must have an SD card,
an SD card reader, and an Internet connection.
To update the navigation software:
www.garmin.com/Kenwood
1.. Go.to.
Downloads..
2.. Click.Download.next.to.the.unit.software..
3. Follow the instructions on the website to complete the
installation.of.the.updated.software
EN-0
You can also purchase map data updates. Check
www.garmin.com/Kenwood
map software is available.
Clearing All User Data
You can clear all user data, including all favorite places,
routes, custom POIs, tracks, mileage logs, and your
home location, at one time.
1..
..Select.Updates and
2.. Touch.Yes..The.navigation.system.restarts.
CAUTION: You cannot recover your user data
once it is deleted.
Touch.Tools.>.My Data.>.Clear
DNX7200 GPS Navigation Instruction Manual
to see if an update for your
All.