Voice Recognition - Kenwood DDX5022 Instruction Manual

Hands Free Unit Control
5 Sets the beep of the incoming SMS.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
6 Returns to the Hands-Free Control screen.
7 Returns to the "Hands Free Setup 1" screen.
8 Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
( "ON")
"ON": Yes.
"OFF": No.
9 Sets the SMS function. (
"ON": Use SMS function.
"OFF": SMS not available.
p Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Recognition> (page
53).
q Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 54).
w Returns to the Hands-Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
52 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY

Voice Recognition

Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1
"ON")
2
3
4
Select the name to register
Go through the procedure of <Calling by
Phonebook> (page 48).
1
1 Selects a name.
"REC" turns on for data with voice for voice
recognition already registered.
Display the voice registration screen
Utter the voice to register (1st try)
2
2 Registers the voice.
3 Cancels voice registration.
Utter within 2 seconds after the Beep.
Utter the voice to register (2nd try)
3