Making A Call Using Outgoing/Incoming Call Records; Calling By Voice Recognition - Kenwood DDX5022 Instruction Manual

Hands Free Unit Control
Making a Call Using Outgoing/Incoming
Call Records
Calls by selecting a phone number from the
outgoing or incoming calls list.
1 Display the Outgoing Calls or Incoming
Calls screen
: Outgoing Calls
: Incoming Calls
The Outgoing Calls or Incoming Calls list screen
appears.
2 Select from calls list
Example : Outgoing Calls screen
1
3
4
2
2
1 Outgoing Calls list.
2 Scrolls the list.
3 Makes a call to the selected number.
4 Creates an SMS for the selected phone
number. See <SMS (Short Message
Service)> (page 55).
5 Displays the detail of the selected phone
number.
6 Returns to the Hands-Free Control screen.
3 Make a call
⁄
• The Outgoing Calls list screen or Incoming Calls list
screen shows the list of the calls originated from or
received at this unit. They are not the ones stored in the
cell-phone memory.
50 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY

Calling by Voice Recognition

Calls by recognizing the registered voice.
⁄
• In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Recognition> (page 52). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Recognition> (page 53).
1 Display the Voice Recognition screen
2 Utter the voice registered in the
PhoneBook
5
6
Utter within 2 seconds after the Beep.
1 Displays the recognized phone number or
address.
2 Cancels voice recognition.
If the voice recognition is succeeded and
there is only one phone number found:
Make a call.
3 Displays the phonebook list.
1
2
3