Cea Specifications; Specifications - Orion WCC 1600.4 User Manual

CEA SPECIFICATIONS

WCC-1600.4
Power Output: 135 Watts RMS x 4 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -85 dBA (reference 1 Watt into 4 ohms)
Addition Power: 220 Watts RMS x 4 at 2 ohms and < 1% THD+N

SPECIFICATIONS

Amplifier Section
Power Output 4W Stereo (Watts)
Power Output 2W Stereo (Watts)
Power Output 4W Mono (Watts)
Remote Gain Capable
Distortion - with all channels driven
at rated power (20Hz to 20kHz)
Frequency Response
Linear Bandwidth
Signal-to-Noise Ratio at Rated Power
Damping Factor
Slew Rate
RCA Input Sensitivity
Input Impedance
Fuse Type
Dimensions
Weight
Crossover Section
Low Pass Crossover
Low Pass Frequency Range
High Pass Crossover
High Pass Frequency Range
INTELLi Bass
1. All channels driven, continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage
at 13.8 VDC.
2. All channels driven, continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at
13.8 VDC.
4
WCC-1600.4
100 x 4
200 x 4
400 x 2
Yes
< 0.1% THD+N
20Hz to 20kHz ±0.25dB
10Hz to 50kHz ±3dB
> 100dB
> 200
> 20V per msec
200mV to 5V
20kW
(1) 100 Amp MAXI
23.9" x 10.5" x 2.4"
10 lbs.
2nd Order
(12dB per octave)
20Hz to 3kHz
2nd Order
(12dB per octave)
20Hz to 3kHz
16dB boost
©2004 Directed Electronics, Inc.