CEA SPECIFICATIONS
WCC-1600.2
Power Output: 350 Watts RMS x 2 at 4 ohms and < 1% THD+N
Signal to Noise Ratio: -78 dBA (reference 1 Watt into 4 ohms)
Additional Power:: 420 Watts RMS x at 4 ohms and < 1% THD+N
SPECIFICATIONS
Amplifier Section
Power Output 4W Stereo (Watts) 1
Power Output 2W Stereo (Watts) 2
Power Output 4W Mono (Watts)
Remote Gain Capable
Distortion at Rated Power
Frequency Response
Linear Bandwidth
Signal-to-Noise Ratio at Rated Power
Damping Factor
Input Sensitivity
Input Impedance
Fuse Type
Dimensions
Weight
Crossover Section
Low Pass Crossover
Low Pass Frequency Range
High Pass Crossover
High Pass Frequency Range
INTELLi Q
1. Continuous 4W load 20Hz to 20kHz, < 0.05% THD, with input voltage at 13.8 VDC.
2. Continuous 2W load 20Hz to 20kHz, < 0.1% THD, with input voltage at 13.8 VDC.
4
WCC-1600.2
200 x 2
400 x 2
800 x 1
Yes
< 0.1% THD+N
20Hz to 20kHz ±0.25dB
10Hz to 50kHz ±3dB
> 100dB
> 200
200mV to 5V
10kW
100 Amp MAXI
23.4" x 10.5" x 2.4"
10 lbs.
Continuously Variable
2nd Order / 4th Order
20Hz to 3kHz
Continuously Variable
2nd Order
10Hz to 3kHz
10dB boost
©2004 Directed Electronics, Inc.