Camera Mode - VTech Kidizoom Princess Digital Camera User Manual

To avoid any potential damage to your Princess Digital
Camera:
• When the USB cable is not connected to the unit, please ensure the USB
rubber cover on the unit is fully covering the USB port.
• When the unit is not connected to a TV, please ensure the TV jack rubber
cover is fitted in place.
• Please ensure the SD card slot rubber cover is fitted in place.
aCTIVITIes

1. CaMeRa MODe

Press the Camera Mode button to go to Camera Mode.
a. Photo Taking
• In Camera Mode, user can look at the LCD screen to
see the photo subject.
• While holding the camera steady, press the Shutter/OK
button on the top of the camera to take a picture.
• You can scroll the Zoom Wheel up or down to increase or reduce the level
of digital zoom.
• You can also choose to add different photo frames to your photos, or
stamps of Disney Princesses. Scroll the Up/Down Wheel to choose one
option. After choosing an option, take a photo as usual and that frame
or stamp will be added to the photo. If you don't want to add a border or
stamp, press the Camera Mode button
Flash modes usage:
Flash mode
Low flash
Auto flash
High flash
• When the Princess Digital Camera is first turned ON, it will be set to autoflash
mode. It will use the flash when it detects that it is necessary. When the flash
is ready to use, a lightning bolt icon will display at the top left corner of the screen.
To change your flash settings, press the Flash button
, low flash
Optimum distance for using
1.5 – 2 feet
2.5 – 3.5 feet
3.5 – 8 feet
, high flash or flash off
to remove it.
to switch between autoflash
.
9