VTech Kidizoom Princess Digital Camera User Manual page 15

Display on the
Princess Digital
Camera LCD does
not turn on
There is no picture
on the TV screen
No sound on TV
Picture is rolling or
bars and lines are
visible on TV screen
Cannot connect
to PC
Cannot save files
1. Make sure there are 4 "AA" batteries in the
camera. Hold the ON/OFF button for 2 seconds
to turn it on.
2. Make sure the camera is not connected to a TV
with the A/V cable.
1. Make sure that there are batteries in the camera
and that the TV is plugged into a power outlet.
2. Make sure that the camera is turned on and the
TV is turned on.
3. Check the connections on the A/V cable between
the camera and the TV and review the appropriate
connection procedure in this manual.
4. Make sure that all cable plugs are securely
inserted into the appropriate ports.
5. Make sure that the TV is tuned to the appropriate
input channel.
1. Check if the TV volume is turned off or muted.
2. Try to increase the volume.
3. Check the audio and video connections between
the camera and the TV.
4. Make sure that the TV is tuned to the appropriate
input channel.
Try to adjust the vertical or horizontal hold
controls (if available) on your TV.
Check the connections on the USB cable between
the camera and the PC and review the appropriate
connection procedure in this manual.
1. Check the memory status of both the built-in
Princess Digital Camera memory and the
SD card (not included), if one is inserted into the
camera.
2. Check your memory default setting (see procedure
in Memory Manager section). If it is set to use an
SD card (not included), check to make sure that
the SD card is not write-protected.
15