Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source; On-Screen Menu Overview - Insignia NS-32E440A13 User Manual

12 To watch TV, press INPUT, press
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1, HDMI2, or HDMI3.
• If your TV is connected to a cable or satellite
box using a component video cable, select AV.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
INPUT SOURCE
HDMI1
HDMI2
HDMI3
USB(Photos)
22
or to
TV
AV
VGA
www.insigniaproducts.com
NS-32E440A13 Insignia 32" 1080p LED TV
2 Press or to select a video input source, then
press ENTER.
Note
Component and composite video devices share the
video and audio jacks. When a device is connected,
your TV detects the type of connection.
If a composite device is connected, AV appears in the
INPUT SOURCE list.
If a component device is connected, Component
appears in the INPUT SOURCE list.
You can also press a Quick Launch Input button to
select the video input source.
• Press TV to select TV (if your TV is connected to
an antenna, cable TV (no box), or cable or satellite
TV using a coaxial cable).
• Press VIDEO to select component or composite
input.
• Press HDMI one or more times to cycle between
the HDMI inputs.

On-screen menu overview

Notes
• Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode (except
the Photos menu).
• Menu items that are not selectable are grayed
out.
• Menus in this manual are described in TV mode,
unless otherwise indicated.
• The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
PICTURE menu (TV mode)
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
OK OK
MOVE
ENTER ENTER
Adjust settings to affect picture quality
AUDIO menu (TV mode)
Audio
Sound Mode
Balance
Advanced Audio
Reset Audio Settings
OK
MOVE
ENTER
Adjust settings to affect sound quality
PICTURE AUDIO CHANNELS SETTINGS
Energy Savings
SELECT PREVIOUS
MENU MENU
PICTURE AUDIO CHANNELS SETTINGS
Standard
SELECT PREVIOUS
MENU
PHOTOS
44
55
75
EXIT
EXIT EXIT
PHOTOS
0
EXIT
EXIT