Connecting A Computer - Insignia NS-32E440A13 User Manual

Connecting a computer

Using VGA
To connect a computer using VGA:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the
VGA (RGB) jack on the side of your TV and to
the VGA jack on the computer.
3 Connect an audio cable with a stereo mini plug
(not included) to the AUDIO jack on the side of
your TV and to the AUDIO OUT jack on the
computer.
4 Plug your TV's power cord into a power outlet,
turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select VGA, then press ENTER.
7 Adjust the display properties on the computer,
if necessary.
16
Using HDMI
To connect a computer using HDMI:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of
the HDMI jacks on the side of your TV and to the
HDMI OUT jack on the computer.
3 Plug your TV's power cord into a power outlet,
then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
HDMI3, then press ENTER.
6 Adjust the display properties on the computer,
if necessary.
www.insigniaproducts.com
NS-32E440A13 Insignia 32" 1080p LED TV
or to highlight HDMI1, HDMI2, or
Note
You can also press HDMI repeatedly to select the
computer.