Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-32E440A13 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different components discover and
communicate with each other. (See page
instructions on how to use INlink.)
Installing the stand or
wall-mount bracket
Notes
•
If you plan to wall-mount your TV, do not install
the stand.
•
Store the stand and stand screws in case you
decide to use the stand in the future.
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Secure the column to the screen with the four
short screws (provided).
Screw type Screw length # of screws
M4
4
Insignia 32" 1080p LED TV
43
for
10 mm
4
Stand column
www.insigniaproducts.com
NS-32E440A13 Insignia 32" 1080p LED TV
3 Secure the base to the stand column using the
four long screws (provided).
Screw type Screw length # of screws
M4
Installing a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous" on page 50.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, remove the four screws
the secure the base to the stand column, then
remove the base. Remove the four screws that
secure the stand column to the TV screen, then
remove the stand column.
20 mm
4
Base
Base
Stand column