Tv Components; Package Contents; Tv Front Controls - Insignia NS-32E440A13 User Manual

Insignia 32" 1080p LED TV
3 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M6 screws.

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand column, base, and screws (8)
• Quick Setup Guide
• IMPORTANT INFORMATION
7.84 in. (200 mm)
Wall-mount brackets
www.insigniaproducts.com

TV front controls

MENU INPUT VOL
# Item Description
Press to open the on-screen menu. For more
1
MENU
information, see
Press to open the INPUT SOURCE list, then press INPUT
or press CH or CH
After the video input source you want is highlighted,
the video input source will change after three seconds.
2
INPUT
For more information, see
source" on page 22.
In menu mode, press to confirm selections.
3
VOL+/VOL– Press to increase or decrease the volume.
Press to go to the next or previous channel in the
4 channel list. For more information, see
CH /CH
channel" on page 23.
Press to turn your TV on or off (standby mode). When
5 your TV is off, power still flows through it. To
/POWER
completely disconnect power, unplug the power cord.
MENU INPUT VOL CH POWER
CH POWER
"Navigating the menus" on page 23.
to select a video input source.
"Selecting the video input
"Selecting a
5