Insignia NS-32E440A13 User Manual page 18

Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y/P
on the side of your TV and to the COMPONENT
OUT jacks on the component video device.
DVD or Blu-ray player
3 Connect an audio cable to the L/R AUDIO jacks
on the side of your TV and to the L/R AUDIO
OUT jacks on the DVD or Blu-ray player.
Notes
• The COMPONENT IN video jacks share the
audio jacks with the AV IN Y video jack.
• When you connect the audio using the
L/R AUDIO jacks, the audio output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select AV, then press ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
14
Using composite video (good)
/P jacks
B R
Cables are often color-coded
to match color-coded jacks.
www.insigniaproducts.com
NS-32E440A13 Insignia 32" 1080p LED TV
To connect a DVD or Blu-ray player using
composite video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an AV cable (not provided) to the
AV IN Y video jack and L/R AUDIO jacks on the
side of your TV and to the AV OUT jacks on the
DVD or Blu-ray player.
Note
• The AV IN Y video jack shares the audio jacks
with the COMPONENT IN video jacks.
• When you connect the audio using the
L/R AUDIO jacks, the audio output is analog.
DVD or Blu-ray player
3 Plug your TV's power cord into a power outlet,
then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to select AV, then press ENTER.
Notes
You can also press VIDEO to select the DVD or Blu-ray
player.
Cables are often color-coded to match
color-coded jacks.
Note: The yellow video connector on
the AV cable connects to the green
AV IN Y video jack.