Special Functions - Honeywell T7351F2010 - Digital Thermostat, 3h Installation Instructions Manual

T7351 COMMERCIAL PROGRAMMABLE THERMOSTAT
Grouping
Temperature Occupied
Heat
Occupied
Cool
Not
Occupied
Heat
Not
Occupied
Cool
Set Day
Time
Override Temporary
Occupied
Temporary Not
Occupied
Schedule Day
Occupied
Not Occupied
Clear Start Time
Copy
System
Fan
Run Schedule
a
On: Continuous fan operation during occupied periods. During not occupied periods and in standby mode when no
motion is sensed, fan cycles with call for heat or cool.
Auto: Fan cycles with call for heat or cool during all periods. (See Product Data Sheet, form 63-2605, for more details).
NOTES: The display returns to default screen after pressing Run Schedule (or after a period of time without keypress):
— ten seconds: when returning from temporary setpoint changes, info screen, temp occ, and temp not occ.
— one minute: when returning from setting clock/day.
— ten minutes: when returning from System Checkout.
— five minutes: when returning from all other modes.

Special Functions

Restore Factory Configuration (Run/
Clear)
IMPORTANT
This operation erases current configuration and
restores factory defaults for all configuration,
parameters, setpoints and schedules. To regain
the old requires device reconfiguration.
1. Press both Run Schedule and Clear Start Time.
2. The display gives the option to revert to FAC CFG.
a. To restore the factory defaults, press up
down until the display indicates YES.
b. To cancel this option, ensure the display
indicates NO.
62-0258—05
Table 5. T7351 Key Function Summary. (Continued)
Button
Sets Occupied Heat setpoint.
Sets Occupied Cool setpoint.
Sets Not Occupied Heat setpoint.
Sets Not Occupied Cool setpoint.
Sets day of week. Tapping key with 'Set Value' segment on increases current
day (same effect as Up Arrow key).
Sets time. Tapping key with "Set Value" segment on increases time in one
hour increments.
Temporary occupied setting for length of time defined by installer. User can
modify setpoints.
Sets holiday length. User selects number of days ("0"-"99"), or "---" for
continuous override.
Selects day schedule to modify. (Used also with copy key.)
Selects occupied event start times for specified day. Repeatedly press this
key to toggle between two occupied events.
Selects not occupied event start times for specified day. Repeatedly press
this key to toggle between two not occupied events.
Clears start time for specified period and day.
Copies schedule from one day to another.
Selects System Mode. Toggles through Em Heat, Heat, Off, Cool, and Auto.
Selects fan operation mode. Toggles between On and Auto.
Resumes running schedule (cancels Temporary Occupied action, Holiday,
and/or Temporary setpoint changes.)
Definition
3. Press Run Schedule.
Get Factory Schedule (Info/Clear)
Performing this operation reverts the schedules to the
factory defaults:
1. Press both Info and Clear Start Time.
2. The display gives the option to revert to FAC SCH.
a. To restore the factory schedule, press up
down
b. To cancel this option, ensure display indicates
NO.
3. Press Run Schedule.
or
8
a
until the display indicates YES.
or