Cisco SPA100 Series Release Notes

Release Notes for SPA100 Series Analog
Telephone Adapters Firmware Version 1.3.5(XU)
Firmware Released: September 2014
Document Revised: July 2015
These Release Notes provide information about SPA100 Series Analog Telephone Adapters firmware
version 1.3.5(XU).
IMPORTANT
As with any firmware release, read these release notes before upgrading the firmware. Cisco also recommends
backing up the configuration before any firmware upgrade.
Changes in Firmware Version 1.3.5(XU) from 1.3.2(XU)
•
•
•
•
•
•
•
•
•
•
•
Cisco Systems, Inc.
www.cisco.com
Improvement in reboot time for SPA122, to increase in RC provisioning speed.
User is able to add configurable prefix to syslog. For example: $PN, $MA, etc.
Support SIP Notify event. When the parameter <Provisioning Enable> is set to "no", SPA can resync
to turn on provisioning remotely. Note: This feature applies only to RC unit.
Support logs over TLS.
Support SSL email.
Enhancement to include device MAC address in syslog messages.
Report low memory availability via syslog, and show memory usage on the web page.
Support firmware upgrade using HTTP 302 redirection.
Caller ID can be updated while creating a conference.
Support Call Hold reminder when the caller makes the second call while the first call is on hold.
Open Secure Sockets Layer (SSL) open source library used in the ATA is upgraded to 1.0.1g in order
to support TLS 1.2.