B&K AVP3090 Owner's Manual page 26

Press ENTER, the display shows:
You can toggle between OFF, ON, AC-3 and DTS modes by pressing x or y.
This holds true for the CD, V1, V2, TV, and TNR digital settings.
Digital off-
Digital on-
Digital AC-3- Selects the corresponding digital input for Dolby Digital Surround
Digital DTS- Selects the corresponding digital input for DTS 5.1 Surround
Press ENTER, the display shows:
Press ENTER:
Press ENTER:
Press ENTER:
Press ENTER:
Press ENTER, the display shows:
You can increase to +6.0 dB by pressing the x, or decrease to -6.0 dB by
pressing y. This holds true for the CD, V1, V2, TV-V3, TUNER, and TAPE level
settings. The level controls are for matching the input levels of all your sources
coming into the preamplifier.
   
Selects the corresponding AUDIO L/R analog input for Pro Logic
Surround Processing.
Selects the corresponding digital input for PCM Pro Logic Surround
Processing. If Dolby Digital is detected, Dolby Digital surround
processing is automatically used.
Processing. PCM signals are not processed in this mode.
Processing. No other signals are processed in this mode.
   
   
   
   
   
  .
Page 24