Table of Contents
Advertisement
2. In the address field of the browser, enter the IP address or host name assigned to the
MergePoint Unity switch you wish to access. Use https://xxx.xx.xx.xx or https://hostname
as the format.
NOTE: If using IPv6 mode, you must include square brackets around the IP address. Use https://[<ipaddress>] as
the format.
3. When the browser makes contact with the switch, enter your username and password, then
click Login. The MergePoint Unity OBWI will appear.
NOTE: The default username is Admin with no password.
To log in to the MergePoint Unity switch OBWI from outside a firewall, repeat the above
procedure, entering the external IP address of the firewall instead.
Using the user interfaces
After you have been authenticated, the user interface appears. You may view, access and
manage your MergePoint Unity switch, as well as specify system settings and change profile
settings. shows the user interface window areas for the MergePoint Unity switch, and
descriptions are provided in the following table.
Chapter 3: Local and Remote Configuration
19
Hide quick links:
Advertisement
Table of Contents
