Closing A Session; Mergepoint Unity Switch Appliance Tools - Avocent MPU1016-001 Installer/User Manual

24 MergePoint Unity® Switch Installer/User Guide
5. Select or deselect the Enable Preemption Timeout checkbox.
6. In the Preemption Timeout field, enter the amount of time you want to pass (from 1 to 120
seconds).
7. Click Save.
To configure KVM session settings:
1. From the side navigation bar, select Unit View - Appliance - Appliance Settings - Sessions -
KVM. The Appliance KVM Session Settings screen appears.
2. Select an encryption level for keyboard and mouse signals (128-bit SSL, DES, 3DES or
AES) and for video signals (128-bit SSL, DES, 3DES, AES or None).
3. Select a language from the Keyboard drop-down menu.
4. Click Save.
To configure serial session settings:
1. From the side navigation bar, select Unit View - Appliance - Appliance Settings - Settings -
Serial. The Appliance Serial Session Settings screen appears.
2. Either enable or disable the Telnet Access Enabled checkbox.
3. Click Save.

Closing a session

To close a session:
1. From the side navigation bar, select Active Sessions to display the Appliance Sessions
screen.
2. Click the checkbox next to the desired target device(s).
3. Click Disconnect.
NOTE: If there is an associated locked virtual media session, it will be disconnected.
To close a session (local users only):
1. From the side navigation bar, select Local Session.
2. Select the Disconnect Active Session checkbox.

MergePoint Unity Switch Appliance Tools

From the Unit Overview screen, you can view the appliance name and type. You can also
perform basic appliance tasks.