Avocent MPU1016-001 Installer/User Manual page 41

Operation
Configure interface system-level settings
Configure access rights
Add, change and delete user accounts
Change your own password
Access target device
To add a new user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User
Accounts - Local Accounts to open the Appliance Local User Accounts screen.
2. Click the Add button.
3. Enter the name and password of the new user in the blanks provided.
4. Select the preemption and access levels for the new user.
5. Select any of the available target devices that you wish to assign to the user account and
click Add.
NOTE: User administrators and appliance administrators can access all target devices.
6. Click Save.
To delete a user account (administrator only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User
Accounts - Local Accounts to open the Appliance Local User Accounts screen.
2. Click the checkbox to the left of each account that you wish to delete, then click Delete.
To edit a user account (administrator or active user only):
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User
Accounts - Local Accounts. The Appliance Local User Accounts screen is displayed.
2. Click the name of the user you wish to edit. The user profile will appear.
Chapter 3: Local and Remote Configuration
Access Level
Appliance
User Administrator
Administrator
Yes No
Yes Yes
Yes, for all Yes, for users and user
access levels administrators only
Yes Yes
Yes, all target
Yes, all target devices
devices
33
Users
No
No
No
Yes
Yes, if allowed