Remote Control - Avermedia GO 007 FM Plus Quick Installation Manual

9. After restart, the system might prompt you to insert the "Windows 98 Second Edition CD-ROM" disk.
Then do the following:
- Click OK, and place the Windows 98SE installation CD into the CD-ROM drive.
- The "New Hardware Found" dialog box appears. Click Browse.
- The "Open" dialog box appears. Choose the Win98 folder from <CD-ROM> and then click OK.
- Click OK.
10. Then both of the drivers and TV software utility are successfully installed into the system.
Installing Drivers and the Application in Windows ME
1. The "Add New Hardware Wizard" dialog box will appear. Just click Cancel to skip the Wizard installation
procedures.
2. Place the installation CD into the CD-ROM drive.
3. When the installation main screen appears, choose TV Utility Software.
4. When the dialog box about license agreement appears, click Yes to accept the agreement.
5. Click Next.
6. Click Next.
7. If your system doesn't have DirectX 9.0 or above installed, the program will prompt you to install DirectX
9.0. The "Installing Mircosoft(R) DirectX (R)" dialog box will appear. Follow these steps to install
DirectX:
- Choose "I accept the agreement" and click Next.
- Click Next.
- Click Finish.
8. Click Finish to restart the computer. Then both of the drivers and TV software utility are successfully
installed into the system.
NOTE:
If DirectX 9.0 or above is not installed in your system, usually the installation CD will automatically install it
during the process of installation. Make sure your system has DirectX 9.0 or above installed so that the TV
software utility can function properly.
Installing Other Software Utilities
After the driver installation is completed, you can install other software utilities contained in the installation CD.
Place the installation CD into your CD-ROM drive. The installation main screen will appear as shown below:
Uninstalling the TV Software Utility
To remove the installed TV software utility from the system, simply choose Start
007 Plus Uninstaller

Remote Control

After installing drivers and applications, you can use a remote control to turn on/off the programs, select channels, adjust
In addition, the remote control can function as a Remote Mouse by using the arrow keys
volume and so on.
(←↑→↓ ) to control the mouse pointer when TV software utility is closed.

Click on the name of the software that you want to install and follow
the on-screen instructions to complete the installation. For
information on using the software utilities, refer to the PDF or Help
files that come with the software.
Click Exit to exit the main screen after finishing the installation.
Remove Application and Drivers
Quick Installation Guide
Programs
Next Finish.
AVerTV GO
ENG-3