TELEPHONE OPERATION
At the Base
Send Page/
Intercom signal
to handset
Mute the
microphone
Answering a Call
To answer a call using the speakerphone, press K on the base. The
SPEAKER light goes on, and the call is connected. To end the call, press
K again.
Connecting to a Call with the Speakerphone
You can make a call at the handset, and then switch to the speakerphone.
1
Make a call at the handset. Press >, then select MUTE on the handset
(to avoid feedback noise).
Press K on the base to connect to the call.
2
Press P on the handset to disconnect the handset.
3
To end the call, press K on the base.
4
Speaker Volume
While using the speakerphone, press E or e on the base to
adjust speaker volume. You'll hear a beep to let you know you're already at
the maximum or minimum setting.
Mute
Mute allows you to hear your caller, but prevents the caller from hearing you.
To activate the Mute feature, press M. The MUTE light on the base
goes on.
To deactivate the Mute feature, press M again.
22
Adjust speaker
volume
Put caller on hold
Activate
speakerphone