Advertisement
O P E R A T I N G
This cordless telephone operates at the
maximum power allowed by the Federal
Communications Commission (FCC).
Even so, this handset and base can
communicate over only a certain distance
— which can vary with the locations of the
base and handset, the weather, and the
construction of your home or office. For
best performance, keep the base antenna
fully extended.
User's Manual for
Cordless
Telephone 4336
Fold open this paper for information about this
telephone's installation and operation. Please read
Part 1 — Important Product Information, included
in this package.
If you receive a call while you are out of
range, the handset might not ring — or if
it does ring, the call might not connect
when you press P. Move closer to the
base, then press P to answer the call.
If you move out of range during a phone
conversation, you will hear noise or
interference. To improve reception, move
closer to the base.
If you move out of range without pressing
O, your phone will be left "off the hook."
To hang up properly, walk back into range,
periodically pressing O until the PHONE
light goes off.
Part 2
© Copyright 1996, 1997 Lucent Technologies Inc. All rights reserved.
Printed in Malaysia. Issue L3
847831633
R A N G E
Changing Channels
This cordless telephone has 10 channels
available for maximum performance.
If you notice noise or interference while
using the handset:
Press C.
1
2
If the interference doesn't clear,
continue to press C until you find a
clear channel
— OR —
Move closer to the base and press
C.
NOTE: You must be in range to change
channels. If you press C while out of
range, you might lose the call. If you do
lose the call, place the handset in the base
for a few seconds, then make the call again.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lucent Technologies 4336
Summary of Contents for Lucent Technologies 4336
- Page 1 O P E R A T I N G R A N G E This cordless telephone operates at the Changing Channels If you receive a call while you are out of This cordless telephone has 10 channels maximum power allowed by the Federal range, the handset might not ring —...
- Page 2 I N S T A L L A T I O N Standard AC Outlet Charging Contacts Modular Jack Base Antenna AC Adapter (extended) Charging Light Base Antenna (down) Dial Mode Switch Telephone Line Cord The instructions below are for both table Turn the antenna clockwise to make standard wall jack will fit into the holes and wall installation.
- Page 3 O P E R A T I O N Special Telephone Services Making a Call Press P, and wait for the If you subscribe to special local telephone PHONE light to go on. company services like Call Waiting or Call When you hear a dial tone, dial the Forwarding, you can access them by pressing P whenever you would press...
- Page 4 M E M O R Y NOTE: The numbers stored in memory This cordless phone can store nine might be lost when you change the handset telephone numbers that you can dial just by pressing M and one of the number batteries or if the batteries run down completely;...
- Page 5 B A T T E R I E S Charging the Handset Battery CAUTION: To reduce the risk of Replacing fire or injury to persons or damage Pack the Battery Pack to the telephone, read and follow these instructions carefully. The batteries need charging when: Remove the battery case cover on •...
- Page 6 C A S E D I F F I C U L T Y handset and press P. This phone If you have difficulty operating this phone, If the phone does not ring when you try the suggestions below. If you still have should operate properly.
Need help?
Do you have a question about the 4336 and is the answer not in the manual?
Questions and answers