The Cursor Does Not Correctly Follow The Pen Movements; Pen Input Not Working; The Tablet Pc Does Not Start After Switch On - Fujitsu Stylistic Q550 64GB Operating Manual

The cursor does not correctly follow the
pen movements
Cause
Pen incorrectly calibrated

Pen input not working

Cause
Incorrect driver installed.

The Tablet PC does not start after switch on

TheTabletPC
Cause
The battery is not installed correctly.
The battery is dead.
The power adapter is not connected correctly.
Fujitsu Technology Solutions
Fault elimination
► Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 34
"Calibrating the pen", Page
Troubleshooting
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch on the Tablet PC.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the Tablet
PC.
► Check whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tablet PC.
Troubleshooting and tips
34.
and
71