The battery discharges too quickly
Battery:
Cause
The battery is either too hot or too cold. In this
case the battery indicator flashes.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
The maximum brightness may have been set
for the screen.
SmartCard reader is not recognised
Cause
Chip card inserted incorrectly.
SmartCard PIN forgotten
Cause
PIN forgotten
SmartCard lost
Cause
SmartCard lost
Fujitsu Technology Solutions
Troubleshooting
► Bring the Tablet PC up/down to a normal
temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
► Use the mains adapter as frequently as
possible.
► Reduce the brightness of the screen to
lower energy consumption: You will find the
setting under Control Panel – Hardware and
Sounds – Windows Mobility Center.
Troubleshooting
► Make sure you have inserted your
SmartCard into the SmartCard reader with
the chip facing upwards.
► Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting
► If you work in a network, contact your
system administrator, who can unlock your
Tablet PC with a supervisor PIN.
Troubleshooting
► If you work in a network, contact your
system administrator, who can boot your
Tablet PC with a Supervisor SmartCard.
Troubleshooting and tips
73