HP 70 Replacement Instructions page 4

Msa7x series enclosure backplane replacement instructions (436513-001, february 2007)

Hide thumbs Also See for 70:

Enlarged version

13.

Tilt the backplane up from the bottom and lift it out of the

chassis (2).

Installing the backplane

To install the backplane, reverse the removal procedure:

Insert the backplane into the chassis, securing it with the

screw.

Install the midplane, riser board, 7-segment display board,

I/O module and blank, fans, and power supplies.

Install the access panel.

Insert the enclosure into the rack and power up the

enclosure.

Verifying component replacement

After replacing the backplane, check the hard drive status LEDs.

Msa7x series