Draining The Oil; Cleaning The Control Box Air Inlet Port - Brother BAS-341F Instruction Manual

8-3. Draining the oil

8-4. Cleaning the control box air inlet port

3. If using the liquid cooling tank (1), fill it with silicon oil
(100 mm²/S).
1929S
1. Remove and empty the waste oil container (1)
whenever it is full.
2. After emptying the waste oil container (1), screw it
back into its original position.
1947S
Use vacuum cleaner to clean the filter in the air inlet port
(2) of the control box (1) at least once a month.
* If the machine is used while the air inlet port is blocked,
the inside of the control box will overheat.
When this happens, the overheating error code ("E-d")
will be displayed and you will not be able to operate
the sewing machine.
1948S
BAS-341F,342F
8. MAINTENANCE AND INSPECTION
30