Table of Contents
Advertisement
AN1600 F1 Network Storage System Quick Specification
Graphics
Storage
Controllers
Expansion slots
Network
10Base-T / 100Base-TX / 1000Base-TX
interface
Compatibility
®
Virtualization
Intel
acceleration
Manageability
Connector
RJ-45
Cable support
CAT 5e wire
Data
transfer
One lane (x1)
method
Network
•
transfer rate
•
•
•
•
Controller
•
•
Video memory
8MB
Supported
resolution
Six on-board 3Gb/s SATA ports, 7-pin with RAID 0, 1, 5, 10 support
Left-side Riser:
- 1 Flex I/O
- 1 PCI-E x16 connector (w/ Gen2 x8 link)
- 2 PCI-E x8 connector (w/ Gen2 x4 link)
Right-side Riser:
-
3 PCI-E x8 connectors (w/ Gen2 x4 link)
NOTE:
1.
The signaling bit rate of PCI Express is 2.5Gbit/s one direction per
lane for Gen 1 and 5.0 Gbit/s one direction per lane for Gen 2.
2.
Indicates the number of physical electrical lanes running to a PCIe
connector
3.
Default bus assignment (in decimal). Inserting cards with PCI™
bridges may alter the actual bus assignment number.
4.
Slots are enumerated differently based on the operating system.
®
Microsoft
operating systems enumerate Device ID by bus starting
from the lowest bus to the highest.
IEEE 802.3 Ethernet interface for 10BASE-T,
IEEE 802.3ab Ethernet interface for 1000BASE-T,
IEEE 802.3u Ethernet interface for 100BASE-TX,
I/O Acceleration Technology
NC-SI, SMBus
PXE, iSCSI Boot
10Base-T (half-duplex) 10 Mb/s
10Base-T (full-duplex) 20 Mb/s
100Base-TX (half-duplex) 100 Mb/s
100Base-TX (full-duplex) 200 Mb/s
1000Base-TX (half- and full-duplex) 2000 Mb/s
Integrated Matrox G200 graphics
Embedded graphics controller (iBMC)
1440x900 32b@ 60Hz 8:5 aspect ratio
1280x1024 32b@ 60Hz 5:4 aspect ratio
®
8
Advertisement
Table of Contents
