Table of Contents
Advertisement
AN1600 F1 Network Storage System Quick Specification
Processor
Cache Memory
Chipset
Memory
Networking
Type
Two Intel
MB L3 cache, 5.86 GT/s, DDR3-1066, 80 W, HT)
Features
Intel
direction. Per link
Support Intel
SpeedStep Technology, Intel
Threading, Intel
Support Registered LV DDR3
Socket
Two LGA1366 sockets
NOTE:
For optimum performance, when two processors are installed, both
must be of identical revision, core voltage, and QPI/core speed.
When only one processor is installed, it must be in the Processor
Socket 1. The other socket must be empty. Processors must be
populated in sequential order. Processor Socket 1 must be populated
before Processor Socket 2.
System thermal solution is capable of supporting up to TDP 95W Intel
Xeon 5600 EP processors. (include standard, HE)
12MB Shared L3 cache
®
North Bridge
Intel
South Bridge
ICH10R
Type
DDR3 1066/1333MHz Registered memory
DIMM sockets
Twelve DIMM slots
Capacity
Registered DIMM: 2 GB, 4 GB
Maximum
Registered memory: 32 GB
memory
Minimum
Registered meory: 6 GB
memory
Memory
ECC, Mirroring, Lockstep Mode, x8 SDDC, Sparing
Protection
NOTE:
1.
Support ECC, Independent channel ode, mirroring, sparing, sparing
mode, lockstep mode, x4/x8 SDDC
2.
Support memory scrubbing
3.
Support Error reduction (BIOS will isolate the faulty DIMM and does
not enable it when system detects the faulty DIMM
4.
Event log/monitoring: Single/multi-bit ECC error
5.
Mixing of Registered memory and Unbuffered ECC memory is NOT
supported.
Controller
Integrated single dual-port Intel
Ethernet Controllers (Dual Port 10/100/1000)
Ports
2 ports
®
®
Xeon
E5620 DP Quad-Core (2.4 GHz, 12
®
QuickPath Interconnect up to 5.86 GT/s, each
®
64 Technology, Enhanced Intel®
®
Virtualization Technology
5520 Chipset
®
Simultaneous Multi
®
82576EB Gigabit
7
Advertisement
Table of Contents
