Memory Specifications - Acer AN1600 F1 Specifications

AN1600 F1 Network Storage System Quick Specification

Memory Specifications

Each processor has three memory channels (1, 2 and 3) and each channel has two slots - A (PxDIMM1A, 2A, 3A
in blue) and B (PxDIMM1B, 2B, 3B in black). So, the system has a total of twelve memory slots. The memory
slots support DDR3-1333 registered/unbuffered ECC memory modules, but it's not allowed to mix RDIMM and
UDIMM in a system. For all memory modes, the slot A in each channel should be populated first. If slot A is
empty, slot B can't be used.
NOTE:
When you are using a single-processor server, you should install the memory module into P1DIMM1A to P1DIMM3B slots when CPU is
installed in CPU1 socket.
The P2DIMM1A to P2DIMM3B slots are enabled when a second CPU is installed on the CPU2 socket.
For the system to function, DIMM modules must be installed following the slot sequence listed below. DIMM
module of the same type, size and manufacturer must be installed in the same colored DIMM slots.
Independent mode:
Single processor configuration (subjected to change if any update)
7
8 GB memory availability varies by region and country.
Total DIMM
Physical 1B
Memory
2GB 2GB
4GB 2GB
6GB 2GB
8GB 2GB 2GB
12GB 2GB 2GB
4GB 4GB
8GB 4GB
12GB 4GB
16GB 4GB 4GB
24GB 4GB 4GB
7
8GB* 8GB
16GB 8GB
24GB 8GB
32GB 8GB 8GB
DIMM DIMM DIMM
1A 2B 2A
2GB
2GB
2GB 2GB
2GB 2GB
4GB
4GB
4GB 4GB
4GB 4GB
8GB
8GB
8GB 8GB
DIMM DIMM
3B 3A
2GB
2GB 2GB
4GB
4GB 4GB
8GB
15