Scanning Only One Side Of A Document - Fujitsu PA03360-B615 Operator's Manual

■ Scanning only one side of a document

Pressing the [SCAN] button
by default. If you want to change the [SCAN] button setting to "Simplex scan" mode, follow the
procedure below.
Operation
1. Click and hold down the mouse button on the ScanSnap icon
"Settings" from the displayed menu.
⇒
The "Scan and Save Settings" window appears.
2. On the [Scanning] tab, select "Simplex scan (single-sided)" from the "Scanning side"
drop-down list.
3. Click the [OK] button to close the window.
3.5 Various settings according to your needs
on ScanSnap starts scanning documents in "Duplex scan" mode
ScanSnap S510M Operator's Guide
, and select
3
61