Fujitsu PA03360-B615 Operator's Manual page 140

Symptom
The orientation of
scanned images is not
displayed correctly
(when "Allow auto-
matic image rotation" is
enable.)
Letters on the scanned
images cannot be read.
The document is not
fed properly or gets
jammed.
The scanned image is
chipped/Slant lines are
produced on the
scanned image/The
output image is wider
than the original.
(*1): To confirm whether the scanner is connected with USB1.1 or USB2.0, click and hold the mouse
button on the ScanSnap icon
button on "Version Information" window. "USB type" is displayed in "Scanner and driver informa-
tion."
(*2): The term "Multi-feed" refers to an error in which two or more sheets are fed into the scanner simul-
taneously.
* The latest information, which is updated on an as-needed basis, is available at the FAQ corner of our
website. Please visit the website at:
http://scansnap.fujitsu.com/
124
Check The Item Out
Depending on the contents
of the document, the
automatic image rotation
may not work properly.
Have you scanned docu-
ments written in small let-
ters?
Is the inside of the scanner
dirty?
With "Automatic detection"
being selected in the "Paper
size" drop-down list, was
the document skewed dur-
ing a scan?
, select [Help] - [About ScanSnap Manager], then click [Detail]
Resolution
For information about the "Allow automatic
image rotation" checkbox, refer to "Correcting
the orientation of scanned image" (page 68)
When small letters are squashed, select
"Excellent" in the Image quality drop-down list
on the [Scanning] tab of the "Scan and Save
Settings" window, and then re-scan the docu-
ment.
Note: If you scan the document in the Excel-
lent quality, the data size of the scanned
image increases and thus time required for
scanning is lengthened.
Clean the dirty locations.
Neatly align the edges of paper sheets with
Side Guide.
* If you are scanning documents of mixed
paper sizes, marking the "Scan mixed paper
size" checkbox [See "Scanning documents of
different widths or sizes at a time" (page 70)],
carefully load smaller documents so that they
can be fed straight. If those documents cannot
be fed straight, it is recommended to scan only
documents of about the same size at a time.