Using The Universal Remote Control; Keys And Functions - Philips SRP4004 User Manual

04_27__Manual_80_210.indd 9
4 P ressandhold the key that does not
function and immediately release it when
the device responds.
• I f the key still does not function as expected,
try pressing it again for a longer period of
time.
5
P ress the
device selection key
twice to save your
settings and exit
setup mode.
• W hen no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
3 U sing the universal
remote control
3.1 Keys and functions
The illustration on page 2 gives an overview of
all keys on the remote control. Try out the keys
you need for operating your devices.
Notes
• K eys having the same functions as the
keys on your original remote control may
have different namings on the SRP4004
(e.g. Info / Display).
• O nly functions that are available on your
original remote control can be used for
operating your devices with the SRP4004.
1
. ................................... S etup light. Lights up red
2
............................... s elects available source
3
2 x
when the remote control
is in setup mode.
inputs (antenna, cable,
etc.).
. ........ d evice selection keys.
• s elect the device to be
operated.
• l ight up when a remote
control command is
being sent.
EN
9
25-09-09