Philips SRP4004 User Manual page 13

04_27__Manual_80_210.indd 13
How do I set the remote control for combo
devices (TV / VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two
different source selection keys to control both
parts of the combo device. For example, if you
have a TV / DVD combo, you might need to set
up the remote control for both TV and DVD to
operate your TV / DVD combo.
Operation
The remote control does not wake up
anymore.
Battery level too low or battery lifetime came
to an end.
• R eplace the batteries. See chapter 2.1.
The device I want to operate does not respond
at all / does not respond to all of the key
commands.
• C heck if the keys you press are available on
the original remote control of the device.
• T ry improving keys. See chapter 2.3.2.
Wrong code selected during setup.
• S et up the remote control again for the
device. Always test if the device responds,
before leaving setup mode. See chapter 2.2.
It may be that the keys that you are trying to use
have a different naming on the original remote
control.
• T ry out all keys to find the one(s) you need.
Batteries
Will my settings be deleted when I replace the
batteries?
No. All user settings will be retained in the
remote control memory during battery
replacement.
EN
13
25-09-09