User Controls
Edge Mask
On
Off
4:3
Letter Box
Re-Sync
16:9
Native
VGA
HDMI 1
HDMI 2
HDMI 3
YPbPr
S-Video
Video
Source
Choose "On" to mask off a few pixels on
each edge of the image to be displayed.
Use Edge Mask "On" if image source
happens to have encoding error near any
edge of the displayable image.
Activate the 12V OUT A output.
Deactivate the 12V OUT A output.
Scale the image at a 4:3 aspect ratio.
Enable the viewing of the letterboxed
nonanamorphically enhanced movie at
full screen width. Part of the original
image will be lost if the image aspect ratio
is less than 2.35:1.
Automatically synchronize the projector to
the input source.
Scale the image at a 16:9 aspect ratio.
The input source will be displayed without
scaling.
Press "VGA" to choose source from VGA
connector.
Press "HDMI 1" to choose source from
HDMI 1 connector.
Press "HDMI 2" to choose source from
HDMI 2 connector.
Press "HDMI 3" to choose source from
HDMI 3 connector.
Press "YPbPr" to choose Component
Video source.
Press "S-Video" to choose S-video
source.
Press "Video" to choose Composite Video
source.
Press "Source" to choose RGB,
Component, S-Video, Composite Video,
and HDMI source.