Turning The Pnd Display On And Off - Eclipse AVN2210p Owner's Manual

Turning the PND Display ON and OFF

1
While the PND display is OFF, press the [SCREEN] button.
The PND display will come ON.
Press the [SCREEN] button for longer than a second while the PND display is
2
ON.
The PND display will go OFF.
● Note ●
For details on using PND, refer to the operation manual of the PND.
Switching Between Left and Right Speaker Output for the Navigation Voice
Voice guidance speaker output can be switched between right and left speaker.
Press the [SOURCE/PWR] button for more than one second to turn the audio
1
mode OFF ("GOOD BYE" will momentarily be displayed).
Right and Left speakers can be switched each time the [FUNC] button and the
2
[SCREEN] button are pressed simultaneously for more than 3 seconds.
RIGHT LEFT
RIGHT: Output from the right front speaker
LEFT: Output from the left front speaker
Selecting the Dimmer Setting
In order to make the screen easier to view, the screen brightness will change when the vehicle lights
(side lights, tail lights, license plate lamp) are lit.
Press the [SOURCE/PWR] button for more than one second to turn the audio
1
mode OFF ("GOOD BYE" will momentarily be displayed).
Selecting the dimmer setting can be switched each time the [MUTE] button and
2
the [FUNC] button are pressed simultaneously for more than 3 seconds.
DIMM ON
ON: Dimmed
OFF: Not dimmed
● Note ●
The brightness and day/night view of PND display can be changed in conjunction with the dimmer
setting. Also they can be changed manually from PND.
See the manual for the PND for information about "Docking Preferences".
DIMM OFF