Skip Job Operation Settings - Konica Minolta bizhub 223 User Manual

13.4 Administrator Settings
13.4.7

Skip Job Operation Settings

Specify whether to start processing for the next job when the current job stops due to running out of paper
in the paper tray. (Default: [Yes])
- [Yes]: Select this option to give precedence to processing of other job while maintaining the stopped
job in the queued state. The queued job is processed after the problem is solved. This function is helpful
because it prevents other jobs from queuing for simple reasons such as paper in a specific paper tray
running out.
- [No]: If a single job is stopped, all other jobs are queued for processing as well. All jobs are processed
after the problem is solved.
1
In the Administrator Settings screen, press [System Settings].
% For details on displaying the Administrator Settings screen, refer to page 13-35.
2
In the System Settings screen, switch the page by pressing [
Operation Settings].
3
Press [Fax] or [Other than Fax].
4
Press the desired button.
bizhub 423/363/283/223
] or [ ], and then press [Skip Job
13
13-43