Table of Contents
Advertisement
Display brightness
You can change the display brightness level used on the phone display.
Press Menu, and select Settings,
with
and
to decrease and increase the brightness level, and press
accept it.
Tone settings
Press Menu, and select
settings in the
Profiles
settings you make, change the settings in the active profile.
Select
Incoming call alert
voice call. The options are Ringing, Ascending,
Select
Ringing tone
for incoming voice calls. To select ringing tones that have
been saved in the Gallery, select
Select
Ringing volume
The vibrating alert does not work when the phone is connected to a charger, a
desktop stand, or a car kit.
Tip: If you receive a ringing tone via infrared connection or by
downloading, you can save the ringing tone in the Gallery.
Select
Message alert tone
tones, or
Warning tones
battery is running out of power.
Copyright
Display settings
Settings
and then
Tone
menu, see
Profiles (Menu 3)
to select how the phone notifies you of an incoming
Open gallery
and
Vibrating alert
for incoming voice calls and messages.
to set the alert tone for the incoming messages,
to set the phone to sound tones for example, when the
©
2003 Nokia. All rights reserved.
and
Display
brightness. Scroll
settings. You can find the same
on page 80. Note that the
Ring
once,
Beep once
and Off.
from the ringing tone list.
OK
to
Keypad
89
Advertisement
Table of Contents
