Whirlpool AMD034 Manual page 9

MODE AND FUNCTION DESCRIPTIONS
6th SENSE MODE
Press the button, the unit enters 6th sense
mode directly regardless of the unit is on or off.
In this mode, temperature and fan speed are
automatically set based on the actual room
temperature.
Operation mode and temperature are
determined by indoor temperature.
Heat pump models
Indoor Operation
temperature mode
21°C or below HEATING
21°C-23°C FAN ONLY
23°C-26°C
Over 26°C COOLING
Cooling only models
Indoor Operation
temperature mode
26°C or below
Over 26°C COOLING
Button is ineffective in Jet mode.
Note: Temperature, airflow and direction are
controlled automatically in 6th sense mode.
However, a decrease or rise of up to 2°C can be
set with the remote control if you still feel
uncomfortable.
What you can do in 6th sense mode
Your feeling
Uncomfortable because of unsuitable
air flow volume.
Uncomfortable because of unsuitable
flow direction.
Target
temperature
22°C
Room
temperature
DRY decrease 1.5°C
after operating
for 3 minutes
26°C
Target
temperature
Room
temperature
DRY decrease 1.5°C
after operating
for 3 minutes
26°C
button
FAN
Swing
adjustment procedure
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
Press it once, the vertical adjustment louver swings
to change vertical airflow direction. Press it again,
swings stops. For horizontal airflow direction please
refer to the chapter "Airflow direction control".
12
ON
OFF