Advertisement
INSTALLATION
Assembly
A) If the worktop is made of wood, use the appropriate
brackets, spring clips and screws provided.
• Position the 4 clips (A) around the cooktop frame, in the
slots provided, see Fig. 1
• Measure the centre of the vertical sides of the cut out a
shown in Fig. 2.
• Position the centre of the brackets (C) on the centre of the
side previously identified.
• The upper edge of the brackets must be flush with the
worktop surface.
• Secure using the 4 screws (B)provided that should screwed
into the pre-prepared holes.
• Insert the cook hob into the pre-prepared hole ensuring that
the clips (A) lodge into the bracket slots provided
(C Fig. 4 e 5).
B) If the worktop is made of marble, ceramic, stone,
plastic materials, etc., order the installation kit,
code 4812 310 19277 from an authorized after-sales service.
Fig. 1
C
Fig. 3
Fig. 4
Fig. 5
83
A
Fig. 2
B
A
Hide quick links:
Advertisement
