Table of Contents
Advertisement
46
Getting Started
Adding memory (optional)
The computer has two memory slots—Slot A and Slot B. You can
install one or two memory modules.
NOTE
If the computer is on, begin at step 1; otherwise, skip to step 5.
1
From the Start or Desktop screen, move your pointer over the
upper or lower right corner of the screen.
2
When the Windows
Charm.
3
In the lower right of the screen click the Power ( ) icon.
(Sample Image) Shut down
To avoid damaging the computer's screws, use a Phillips screwdriver
of the correct size that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
Before you install or remove a memory module, turn off the
computer. If you install or remove a memory module while the
computer is in Sleep or Hibernation mode, data will be lost.
For this model, Slot A is the bottom slot. Slot B is the top slot. If only
one memory module is to be installed, it must be installed in Slot A.
Pressing the power button before shutting down the Windows
operating system could cause you to lose your work. Make sure the
system indicator panel's storage drive light and the drive in-use light
are off. If you turn off the power while a disk/disc is being accessed,
you may lose data or damage the disk/disc and/or drive.
®
Charms appear, click the Settings (
Shut down option
Power button
)
®
Hide quick links:
Advertisement
Table of Contents
