Sony HVL-F60M Operating Instructions Manual page 79

External wireless gn60 flash and 1200lux / 0.5m led with quick shift bounce and quick navi control
Hide thumbs Also See for HVL-F60M:
Table of Contents

Advertisement

Available languages

Available languages

• When using a DSLR-A900, DSLR-A850, SLT-A99V/SLT-A99, SLT-A77V/
SLT-A77, SLT-A65V/SLT-A65, SLT-A57, SLT-A37, NEX-7 or NEX-6
camera, you can use HVL-F56AM or HVL-F36AM flashes as off-camera
flashes. Set the controller flash mode to [CTRL]. HVL-F56AM and HVL-
F36AM off-camera flashes are recognized as being in the REMOTE group, so
you can only control the lighting ratio of up to 2 groups using this flash unit, an
HVL-F43AM or an HVL-F58AM as the controller. For more details on setting
the controller flash mode, see "Setting wireless control flash mode [WL CTRL]"
in "MENU settings" (page 92).
• For wireless flash photography with lighting ratio control, the overall lighting
ratio is shown by the wireless lighting ratio control indicator on the LCD panel.
e.g.)
When a display is [4:2:1], the flash of each group fires with power level of 4/7, 2/7 and
1/7 of the whole.
1
Set the camera, flash (controller), and flash (off-camera
flash) to wireless flash.
Camera Setting:
Set the flash mode to wireless (WL).
For details, refer to the operating instructions supplied with your camera.
Controller Setting:
1
Press the MODE button to bring up the MODE
screen and select [WL CTRL].
2
Press the Fn button to display the Quick Navi
screen and press the control wheel up, down, left or
right to select the wireless control setting indicator.
79
GB

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents