Restoring Control To Factory Default Settings; Setting Oven Controls; Interior Oven Light - Electrolux EI30EF35JS Use And Care Manual

Restoring control to factory
default settings
Your appliance is set with a number of
predetermined oven control settings. Over time, you
may make changes to the original factory settings.
The following functions or features have user-
programmable options or adjustments that may
have been changed from the default settings:
• Clock 12-hour or 24-hour display mode.
• 12-Hour Engergy Savings or continuous bake
mode.
• Tone volume.
• Oven temperature display mode (F° or C°).
• Any oven temperature adjustment made.
• Any saved "my favorite."
IMPORTANT
Before restoring, please be aware that any
previous changes made to the oven control
settings will be erased once the START keypad
is pressed. This includes any temperature offset
made for the oven when baking.
To restore to factory default settings:
Example
Step
1. Press and hold the number 7 key
for 6 seconds. A beep will sound
and "rST P S" will appear in the
display (Figure 1).
2. Press START to accept.
Fig. 1

Setting Oven Controls

Interior oven light

The interior oven light will automatically turn ON
when the oven door is opened.
Press keypad to turn the interior oven light ON
and OFF whenever the oven door is closed.
The interior oven light is located at the upper left
rear wall of the oven interior and is covered with a
glass shield held in place with a wire holder. The
glass shield must be in place whenever the oven is
in use.
To change the interior oven light, see "Changing the
oven light" in the Care & Cleaning section.
Press
43