Download  Print this page

Locations Of The Surface Radiant Elements; Using The Touch Control - Electrolux Electric Cooktop Use & Care Manual

Electric cooktop
Hide thumbs

Advertisement

10
F
Setting Surface Controls

LOCATIONS OF THE SURFACE RADIANT ELEMENTS

Your cooktop is equipped with radiant surface burners with different wattage
ratings. The ability to heat food quicker and in larger volumes increases as the
element wattage increases.
The radiant surface elements are located on the 30" cooktop as follows:
-
2 single radiant elements located at the rih1rih60ft rear positions;
-
1 dual radiant element located at the rih1front position;
-
1 triple radiant element located at the 60ft front position;
The radiant surface elements are located on the 36" cooktop as follows:
-
2 single radiant elements located at the rih1rih60ft rear positions;
-
2 dual radiant elements located at the rih1rihcenter front positions;
-
1 triple radiant element located at the 60ft front position;

USING THE TOUCH CONTROL

The recommended way to use the touch pads on the cooktop is shown
in Fig. 3. Be sure that your finger is placed in the center of the touch pad
as shown. If the finger is not placed on the center of a pad, the cooktop
may not resporihto the selection made.
Lih1ly contact the pad with the flat part of your entire fingertip. Do not
just use the narrow end of your fingertip.

Advertisement

loading

  Also See for Electrolux Electric Cooktop

  Related Manuals for Electrolux Electric Cooktop

  Related Content for Electrolux Electric Cooktop