Clearing Staple Jams - Lexmark T64x Clearing Jams Manual

5
Remove the stack of print media.
6
Close the finisher output bin cover.
7
Press .

Clearing staple jams

1
Lift the front edge of the finisher output bin
cover until it locks into position.
2
Remove the print media.
3
Press the latch to open the stapler access door.
4
Firmly pull the colored tab to remove the staple
cartridge holder from the stapler.
5
Use the metal tab to lift the staple guard, and
then pull out the sheet of staples.
Discard the entire sheet.
6
Remove any loose staples from the staple
guard.
7
Look through the clear covering on the bottom
of the cartridge holder to make sure no staples
are jammed in the entry throat.
8
Press down on the staple guard until it snaps
securely into place.
9
Push the cartridge holder firmly into the stapler
until the cartridge holder clicks into place.
10
Close the stapler access door.
11
Close the finisher output bin cover.